SPCA series

SPCA536A is designed for the advanced imaging applications, including multi-mega pixel digital still cameras and digital video recorders. It integrates a rich set of components required by complex imaging products. Its peripheral interfaces are so flexibly designed that it is easy to implement many different applications. This chip can support both CCD and CMOS image sensors up to 16M pixels. SPCA536A has built in USB2.0 high-speed device controller and USB2.0 full-speed embedded host controller. The embedded high quality color processing engine, powerful 32-bit RISC CPU and real time MPEG codec engines make SPCA536A an ideal solution to implement a high-end digital still camera.

• Support image sensors up to 16M-pixel resolution.
• Support dual-sensor application.
• Interface to CCD sensors from Sony, Sharp and Matsushita.
• Support mega-pixel CMOS sensors from Omnivision, IC Media-Micron, ST Microelectronic and many other major vendors in US, Japan, Korea and Taiwan.
• Built-in Timing generator for progressive, 2-field, 3-field and 4-field CCD sensors.
• Support both master mode and slave mode CMOS sensors.
• Accurate flash light control.
• Excellent color processing engine
  — AE window statistics
  — AWB window statistics
  — 2-D edge enhancement
  — Luminance histogram
  — Hue/Saturation adjustment
  — Brightness/Contrast adjustment
  — Programmable edge enhancement
  — Bad pixel concealment can be done by Hard-wired engine or by the user-defined firmware.
  — Fully programmable Gamma table
  — Lens shade compensation
• Support 16M, 64M, 128M, 256M, and 512M SDRAM.
• Extended interface to communicate with external devices, such as an Ethernet controller.
• Support SMC, MMC, SD, xD, Memory stick (Pro) and CF flash memory cards.
• EJTAG debugging interface with complete debugging tools.
• Two RS-232 ports.
• Hard-wired JPEG/MPEG engine to speedup the image compression. Support JPEG, Motion JPEG, MPEG-1 and MPEG-4. QVGA resolution (320x240) real time (30 fps) codec.
• Up to 4X digital zoom.
• Built-in 32-bit RISC with 14K-byte cache.
• Shadow memory architecture to enhance the system performance.
• 4M bytes programming space.
• On chip 16K-byte boot ROM.
• Programmable CPU operating frequency from 375kHz to 96MHz.
• USB2.0 full-speed and high speed.
• Build-in USB full speed transceiver.
• Build-in USB host controller.
• USB MSDC compatible.
• Graphic-based OSD.
• Built-in TV encoder with triple DACs, supporting both NTSC/PAL composite video and analog RGB output.
• Digital TV output interface, conform to CCIR601 (8-bit/16-bit data bus) and CCIR656 standard.
• Digital TV input interface covers CCIR601 (8-bit data bus) and CCIR656.
• Digital TFT LCD output interface, Unipac, Epson, Casio
• Digital STN LCD panel interface for GiantPlus panels.
• Interface to micro display devices.
• Built-in 8-bit audio ADC.
• PWM audio output.
• Built-in 4-channel 8-bit ADC
• Built-in RTC
• AC97 interface to external audio codec.
• I2S interface to external DAC.
• In-system-programming for firmware update.
• 1.8V/3.3V dual power supply.
• Package TFBGA288 16x16 mm or 12x12 mm
  

If any inquiries, please don't hesitate to contact us!!